Safety
Using a Scissor Lift Safely

Operating a Skyjack scissor lift from Rent One LLC in Hardin, Montana, requires attention to safety and the manufacturer guidance for the exact model you are renting. Before starting a project, make sure you have proper training and familiarity with the machine.
Pre-Operation Inspection
Before every use, perform a walk-around inspection to confirm the machine is in safe working order:
- Check fluids and leaks: Look for hydraulic leaks, check oil levels, and confirm batteries are charged and secure.
- Inspect structural integrity: Examine the platform floor, guardrails, and tires for damage, cracks, or loose parts.
- Test controls: Verify ground and platform controls, including emergency-stop buttons, before elevating.
Jobsite Assessment
A safe work area is as important as a safe machine:
- Level ground: Operate only on firm, level surfaces. Avoid slopes, holes, and soft dirt that could cause a tip-over.
- Overhead hazards: Watch ceilings, fixtures, and power lines. Keep at least 10 feet away from overhead wires.
- Clear the area: Mark off the work zone with cones or tape so bystanders do not walk under the platform.
Safe Operation Tips
- Stay within guardrails: Never sit, stand, or climb on guardrails. Keep your feet on the platform floor.
- Mind the weight limit: Do not exceed the capacity on the machine safety decals, including the operator, tools, and materials.
- Fall protection: Guardrails are required, and many jobsites also require a safety harness and lanyard connected to designated anchor points.
- Avoid windy conditions: Do not operate outdoors when wind speeds exceed the manufacturer limit.
Basic Control Functions
Most Skyjack models use a standard control box:
- Master switch: Confirm the main power switch at the base is on.
- Joystick: Push forward to move ahead, pull back for reverse, and use the rocker switch on top to steer.
- Lift mode: Toggle to Lift to raise or lower the platform using the joystick.
For questions about your rental, call Rent One LLC at (406) 699-9865 or refer to the operator manual kept with the lift.
